Archive for the ‘Articles’ Category

Coaxial Crimping

Wednesday, March 10th, 2010

Crimping a connector for coaxial cable?

What are the points to be addressed when crimp a connector to a co axial cable? If the wire contact with the connector? or the mesh should be isolated from the connection?

Yes, the wire must be in contact with the connector body. The wire the center should not touch the screen, or the connector. If there is a sleeve on the connector, should go between the mesh and the middle of nylon (which may or may not be aligned with the paper.) If no paper inside, generally should be left intact in the one around the insulation for the contact center. The connector can play this role, if any, but the paper should not be in direct contact with the center conductor.

Coaxial Socket Crimping Training Video



Antenna Mount

Tuesday, March 9th, 2010

Antenna Mount
Where can I find a radio magnetic mount antenna that folds down?

Here are some of the magnet assemblies nails used standard / antennas: http://www.walcottcb.com/mounts-magnet-mounts-c-28_353_429.html Here is a fold over Stud: http://www.walcottcb.com/antenna-fold -over-adapter-203ez – p-262.html? cPath = 28_354_446 Depending on antenna size as you wish to determine the size of the magnetic assembly. The amount of folding limited to a 5-m antenna fiber glass. This is another type of flip antenna (antanna travel to CB): http://www.kenneke.com/antennas.html http://www.kenneke.com/ 7Ejon/emerantenna.jpg%

Hamstick Portable Antenna Mount/Mast-Part 2



General Instrument

Tuesday, March 9th, 2010

General Instrument
How can I program a cable box?

I have a General Fund instrument cable is DCT1124/1151/ABCDGI/R2 model, and I know I can schedule or use any cheat codes in this cable box

The mark of the Calbe Guy! Yahoo!

GI Joe Rise of Cobra The Pit Mobile Headquarters with General Hawk Movie Toy Review



Universal Lnb

Tuesday, March 9th, 2010

Universal Lnb
What is the difference between LNB and LNBF? and standard or universal?

LNB: Low Noise Block converter in short, and a C-band dish Large or other special information use purchase LNB dish to set on the combination of C and Ku Antenna horn to make it work. He now heads the home broadcast services to the needs cost savings to offset use the small dish with LNBF, F means horn with built in feed LNB.

DIRECTV New SWM Line LNB Satellite Dish Install Part 2



Serial Adapter

Tuesday, March 9th, 2010

Serial Adapter
I bought a USB PDA / Serial Adapter for my computer, but will not let me install the driver?

I have Windows XP. The cable consists of DYNEX. My computer says "Windows can not open this file" File: SERSPL.VXD then gives me two options 1. use the web to find an appropriate file 2. program select from a list. Well, I've tried them all on the list and none of them work. Option 1 leads me to a file association with Microsoft Windows. It also says that file type: unknown Description: Windows does not recognize this file type. I tried calling Dynex company and have been on hold for about 45 min. Please help. Thanks

You may also need to have the USB cable connected to one of the USB ports on the back of the team, not the front. I do not know why but for some reason it makes a difference.

USB RS-232 Serial Adapter DB-9



Sonicview Fta

Tuesday, March 9th, 2010

Is there a FTA satellite receiver to record television like TiVo?

We have a Coolsat receiver, but we are thinking sonicview. He tried to find a recording feature (I think it is called DVR), but have not found any luck. Thanks for any help.

Several receptors FTA have DVR, Visionsat IV200 PVR PLUS (Recommended), Diamond 9000 HD PVR receiver Relook 400 Linux. You should try to learn about each of these to see which is best for you.

Loading FTA Files Sonicview 8000 – file loading Sonicview Guide



Star Fortecstar

Tuesday, March 9th, 2010

Star Fortecstar

Service center Fortec star



Satellite Diplexer

Tuesday, March 9th, 2010

Satellite Diplexer
3-way satellite diplexer?

I just bought the R-15 Directv, I already have 2 receptors than addind am now a 3rd. I have a dual LNB. So my question is, have I seen a diplexer 3 way on eBay. With this you can split an LNB to 3 and have been veiwing separately on the recipients? DVR = 2 other receiver = 1 from total of 3 1 LNB. The other LNB is being used for upstairs and I'm not trying to run a lot more than wire, is this possible or does not work for me? Ok i found this, will it work? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item = 320,077,857,888 & ssPageName = STRK: MEWA: IT & ih = 011

If you have a dual LNB on the basic 18-inch dish does not require a diplexer, you need what is called multi-switch.In his case, a 3×4 Multi-Switch, is called well, because it has 2 inputs of your plate which converts to 4 outputs and also has an input for antenna 3 or diplexer cable.A is to combine or separate the signals from antenna or cable with the satellite in a single line, for example, if you used the Multi-Switch and connected the 2 lines of your plate and a line of the TV antenna outside you should have a diplexer on the back of each receiver to separate signals SAT and ants to adequate connections.Do not try to use a regular splitter for this as the receiver sends voltage to the LNB and a splitter will allow this tension to feed back into the antenna connection possibly causing damage his equipment.Also never heard of anything such as a 3-way diplexer, a diplexer combines / separates SAT and the ant to / from a line.Hope this has helped some. I just saw the photo you sent with your question, and that is not a diplexer.That is a regular splitter, as used in cable television production have to remember that the satellite receiver sends DC voltage to the plate, using a splitter that does not have a DC filter and a diplexer not allow the electricity to power again where none is intended to be and will harm your computer.

Ham Radio AO-51 Satellite Dual Band Portable Antenna by web7days



Yoke Lnb

Tuesday, March 9th, 2010

What should I add, for a 3rd receiver to my satellite dish bell.?

I have 1 dish with 2 LNB yoke And when I added otherwise a 2 LNB dish and receiver connected to 3 with only 709 channels, the receiver of the other 2 lines Do I need a type of apparatus has to put the dish OTHE?

Always use the options … go out and get your installation.



Satellite Cable

Tuesday, March 9th, 2010

Satellite Cable
The image quality between cable and satellite HD cable?

How much difference between the image quality when using the satellite cable instead of high-definition cable.

There is no answer to this that fits all cases, because there are differences in capabilities between the various services and regions. Some providers are better prepared for increased bandwidth required for HDTV than others. In general, at this time, many Cable companies have an advantage on operators of satellite broadband. This means they can offer more options, both uncompressed signals. However, Not all cable companies are so well prepared, and so in your case, the satellite can be better. When a signal is compressed too, can cause various disruptive effects, execution back to back, breaking into pixilations during a football match.

Digital TV Free Online. Watch Satellite Cable TV Shows On PC. Over 3000 Best TV Stations Channels.