Using antenna splitter, do not get a signal both to the receiver.?
I have 1 antenna on my roof with a single LNB. I want you to connect 2 individual receptor same cable. I'm using the quality of this type of separator http://www.summitsource.com/images/products/SP2532.jpg TV lamented a beautiful and second is the signal is not found. Is there a different or different profile divider that is needed? What should I use the splitter thank you very much, Experts. and its satellite receiver. (which is actually possible to connect multiple satellite receiver with antenna LNB Dish)
OK, first some basics. An LNB is a low noise block Down Converter. Amplify the satellite signal and changes the whole band to L-Band (950 MHz – 1450 MHz). Then, the satellite receiver is the tuning. So if this is a small dish as Dish Network or DirecTV, you should be able to split the signal between the antenna and receiver. Just be sure to use a cable splitter and is good at least to 1450 Mhz. Note that the separator must also have a port that will pass power from the receiver to the LNB to power it. That will be marked on the cover divider. The splitter is showing, it seems passing power. This will http://www.arrisistore.com/product.php?pid=210315.
Dreambox One LNB Setting & Chanel list Creation Tuitorial (Tamil Europe satellite channels)
