A line signal amplifier help a cable television signal for a regular small 19inch LCD TV?
One like this? O http://cgi.ebay.com/INLINE-AMPLIFIER-CABLE-TV-SATELLITE-SIGNAL-BOOSTER-NEW_W0QQcmdZViewItemQQitemZ140296311340QQsalenotsupported are more of a gimmic?
These are for the satellite. You would be wasting your money. If the image is bad cable, call your service provider and complain.
10/06 BG Skate Comp 1
How to protect coax from the interference?
Completely wired all coaxial cables. I'm using quad shield RG11. My coaxial concern that pass close and crosses with electrical cords. Is there anything I can do to reduce interference? Maybe run coaxial plastic or metal tubes …. Can you think of something?
The coaxial cable shielding prevents interference, if it is properly grounded. You get the interference when shielding has been damaged or has a good ground. The shielding must eventually be grounded.
Corrente a modo comune ovvero il cavo irradia current on the shield of the coax
Best way to configure my CCTV / CATV?
Hello, I'm in a school that runs a TV show in the morning. I'm not sure how better to create our television to minimize loss. We have: 50 dB Amplifier Saw Filter Modulator Blonder Tongue Hi Pass filter several splitters Today we have our video source, which starts out as RGB. That happens by Blonder tongue and sent via coaxial cable about 100 feet above, a control booth. There (The picture looks good at that point by the way) the signal (channel 3 of the modulation) is combined with cable TV with a splitter. In an entry in the divisor is our Channel 3 programming, and the other is the TV AC high-pass filter (for channel 3 can enter .. ((that's our theory))). This combined signal is set 50 dB amplifier. The output is placed in a 3-way splitter. Two of them what we consider that the classrooms of high priority, and the third will be a lower priority (unless used) Area congregation. How can we make our system better? Thanks! Nick
Nick – It's hard to say exactly how this has connected from their description, but I will try to help. First of all, if I were you, I would like to make this setup a channel 3 only closed system circuit if possible. In this way, you can send your program to the modulator and then to the amplifier and then to the classroom. When troubleshooting, always break the system even the simplest connection and go from there. Try video and audio to an amplifier and modulator to TV output with everything else removed – is better? If so, keep it that way if possible. If you need cable TV channels also should really reschedule for a free channel modulator is higher than ch3 – maybe 88 or something.
BTD 75SH AMPLIFIER CATV
Can someone explain what a CATV drop amplifier hooks into?
Living in an apartment, not to sure that I am getting the full cable signal. In one room, the tv did not have a good signal, picture and sound was somewhat fuzzy. I hooked into the TV external jack a clock radio as an external speaker with a built in antenna within the plug cord. The reception improvement is much better. Should I think that the connection from cable input to the tv, then the connection from the tv to the clock radio amplifies the signal due to the built in antenna, which would now be tied into a digital signal? If you can sort this out for me, it would be greatly appreciated.
Are you actually using CABLE? Or are you just attempting to get local TV channels by connecting to Cable’s antenna wiring ?
It sounds like you are just attempting to get the local TV channels with your setup, because the behavior of the system acts EXACTLY like you are….
And if you are PAYING for cable, then they have a bad connection to your apartment, and a DROP AMP will boost your signal, after they test your line for broken connections.
If you are only trying to get the local channels, then the CABLE connection is going to SHIELD your local TV signals from getting to your TV set properly…
You would want to disconnect the Cable from your TV set, and purchase a tabletop antenna to get your local TV channels.
JLX750 AMPLIFIER www.eltigre-catv.com
Planet Waves Plenum Wire Solution Demo
how this ecg amplifier circuit processed?. i need a clear detail about the circuit diagram.any one can help me
link for an circuit—http://www.sciam.com/media/inline/000C74E4-5172-1C74-9B81809EC588EF21_arch1.gif
It is an high impedance instrumentation amplifier with differential inputs for noise rejection, a zero offset adjustment and low pass filtering, like it says. It looks clear enough to me.
Why don’t you get an evaluation board from Analog Devices if you want to try it out?
Inline skater @ Oct 21, 2006 BG Comp
Question for those that live alone Have Gas prices and cost of living forced you to cut back?
Just Curious.
I live alone with 2 cats, I live in Ohio and make about 25K a year. I’ve been cutting back this last year due to cost of living and gas. I was living beyond my means.
I had 2 cars, I Sold the 94 Buick and the 04 Toyota Camry and got a new Kia Rio. New car with warranty and lower payment then the Camry. paid off credit cards most of the way when I sold my Buick. I may give up my custom license plate on my car and just get the standard one.
I dumped Cable TV and bought an amplfied rabbit ears(and an HD converter box) that was 47$ right there. It was CATV or the internet. I would just go to the library for the net but it is my main form of entertainment so I guess I’ll give in on that one.
Cut out cell phone texting(put a blocker on it) and dumped my land line.
Started shopping more at Aldi’s for some stuff. Ebayed some stuff and took some stuff to a mens consigment shop that I wasn’t wearing.
How about you?
I drive 95 miles round trip to the job 5 days a week. The car gets 38 mpg by only going 60 on the e-way. It stays parked on Sat & Sun.
Quit dating altogether > women don’t seem to want to cover their half of the charges. Rarely eat out > frozen pizzas every now & then.
Never had a land line since my divorce > cell phone only. Never text. Do have cable tv > so don’t go to movies very often & only matinees when I do >no concession spending either.
Had to quit running air > fans only. Keep most of the lights off & use a dimmer switch on most of them. A toaster oven does most of oven work & occasional reheats in the microwave.
Luckily though, gas is down to $3.69 where I live > was up to $4.25 a couple of weeks ago. Every now & then, I will spend $2 on the lotto> it’s a total waste, but you have to play to win.
Who Needs Analog to Digital Converter Box?
Can I use as rg6/quad coaxial audio cable?
This can be a bit silly but I have seen coaxial cable connections made av RG6 with RCA compression fittings used for RGB / component and digital home theater subwoofer. My question is: Can you make your own audio interconnect cables rg6/quad using shield and RCA ends? Unwieldy to be difficult to manage?
The problem with heavy stiff wire is that sometimes the RCA connectors stay well, and the rigid cable connector can damage the piece of equipment or simply be dropped. A lighter, flexible cable that works best for the RCA cables. A heavy stiff wire is harder to bend over and sticks behind his rack of equipment.
How to Video on installing Compression F Connectors for TV Home Theater Installation
Can I install freesat my existing sky dish?
I have an old sky dish on my Sky + quad LNB Its got two of which wires connected to them, which obvoiusly connected to my Sky + box. Can I connect a freesat box and work Wil? And could I connect the other two sockets empty and available LNB TV freesat multiple servers?
yes, the group satalite same / same location.
Antec 1200 Quad Q6600 9800gx2 SLI gaming computer rebuild with cable managment
Internet Connection Help?
Ok. So for the past few months, I’ve been bringing our cable modem (I have cable internet) from our room where the computer is, to m room where my Xbox 360 is. Then I’ve been hooking it up and playing online games with no trouble. Just lately, the cable modem won’t pick up internet in my room. It’s a Motorola Surfboad modem. When I hook it up with the cable near my computer, it works perfectly but when I bring it all back to my room, it just stays blinking on the receive button. I’m starting to think that maybe its the cable because the one in my room is a standard white coaxial cable. But the one near my computer was installed there by the cable company and is one of those black coaxial cables that some special thing at the end (I think its called a quad shield or something). Anyway, if anyone can tell me anything that doesn’t require getting anything wireless, please do so. Thanks
make sure and check your ethernet cables, which are:- Crossover and straight through.
Crossover cable can be sometimes causing the lagging problems between the devices. You better off with straight through ethernet cable which are the best for the consoles, preferably CAT5.
LTA Quad Submission: Riot Shield Review
