3-way satellite diplexer?
I just bought the R-15 Directv, I already have 2 receptors than addind am now a 3rd. I have a dual LNB. So my question is, have I seen a diplexer 3 way on eBay. With this you can split an LNB to 3 and have been veiwing separately on the recipients? DVR = 2 other receiver = 1 from total of 3 1 LNB. The other LNB is being used for upstairs and I'm not trying to run a lot more than wire, is this possible or does not work for me? Ok i found this, will it work? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item = 320,077,857,888 & ssPageName = STRK: MEWA: IT & ih = 011
If you have a dual LNB on the basic 18-inch dish does not require a diplexer, you need what is called multi-switch.In his case, a 3×4 Multi-Switch, is called well, because it has 2 inputs of your plate which converts to 4 outputs and also has an input for antenna 3 or diplexer cable.A is to combine or separate the signals from antenna or cable with the satellite in a single line, for example, if you used the Multi-Switch and connected the 2 lines of your plate and a line of the TV antenna outside you should have a diplexer on the back of each receiver to separate signals SAT and ants to adequate connections.Do not try to use a regular splitter for this as the receiver sends voltage to the LNB and a splitter will allow this tension to feed back into the antenna connection possibly causing damage his equipment.Also never heard of anything such as a 3-way diplexer, a diplexer combines / separates SAT and the ant to / from a line.Hope this has helped some. I just saw the photo you sent with your question, and that is not a diplexer.That is a regular splitter, as used in cable television production have to remember that the satellite receiver sends DC voltage to the plate, using a splitter that does not have a DC filter and a diplexer not allow the electricity to power again where none is intended to be and will harm your computer.
Ham Radio AO-51 Satellite Dual Band Portable Antenna by web7days
