Chieta 4×1 Weatherproof DiSEqC Switch
Posts Tagged ‘diseqc’
Chieta Diseqc
Wednesday, May 5th, 2010Diseqc Fta
Thursday, April 15th, 2010
USALS SAT-Anlage (SAT Rotor Dish) DiSEqC
Motor Diseqc
Thursday, April 1st, 2010
How to setup diseqc 8in1 + motor
Switch Dish
Monday, March 22nd, 2010
It's my digital DirecTV dish, or I have to make a change for 2009?
If so, can I have a link on what I need to get to make the change?
you are ok with your system is digital, but if you have any TV sets that are not connected to a DIRECTV receiver you may want to request a coupon
Finding More Dish Network Programming for Less Money than directv with Better Satellite TV
Motor Diseqc
Sunday, March 14th, 2010
SG6000 Motor (diseqc)
Dish Switch
Thursday, March 4th, 2010
I just got Dish TV and am trying to play my Xbox 360 hooked up to me and now I have recciever change
How do I change over Sat my xbox. I plugged in the red white and yellow A / V jacks How do I change.
Assuming that your receiver is to output to TV, you have to know what receiver input connected int the X-box. ie, DVD, video 1, etc, then on the receiver itself change the input button or switch (receiver dependent) to entry. Also make sure your TV is at the outset that the output of the receiver is connected. That should get the picture and analogue sound.
Finding More Dish Network Programming for Less Money than DirecTV with Better Satellite TV
Satellite Diseqc
Tuesday, March 2nd, 2010
Ok, thanks to you I know now I need a 2 DiSEqC switch.?
Now I need help setting up the Antenna ',' I one XTSC Xtreme-520 Satellite & Terrestrial and Sat Hotbird Hotbird window looks like this = SAT / / TRANSPONDERr = 11 **** ect / / POWER LN = ON / / LNB U-type = LBN1 / / 22Khz = Auto / / TYPE COMMUTE = None / / option = None / / OV/12V = OV ….. With a DiSEqC switch is the window of Astra has to be the same set up (TYPE I CUMMUT the DiSEqC poss) I suppose I should put that on both windows. But if the LNB to OFF in the window of the new Astra or ON? ie. is the switch lighting? Sorry for keeping but can not find a simple guide Thanks
Must be one or the other. One by one out.
SG9120 DiSEqC Motor – HH Satellite Dish Motor Mount for DiSEqC1.2
Diseqc Satellite
Sunday, February 21st, 2010
2 LBN to 1 in the satellite receiver?
I have two plates towards each other towards Astra and Hot Bird. For now I have to screw in one or the other antenna then change the cables of the SAT with the (Green) button. Question: How should I change on Sat physically (with the green button) I take the junction of two wires with duct tape then plug in my LBN / on my receiver … or would you f *** something? I know I could buy a DiSEqC and do well, but at the moment all you can afford is the electrical tape and a little antenna cable !!!!! I have a XTSC Xtreme-520 Satellite & Terrestrial Receiver *
the receptor changes real tension in the cable Sat when you're changing the channel. If you connect two wires together that wouldnt be good I guess:) What is suggested if you can not spend a DiSEqC to try to get a splitter with a built-in switch can connect up to two antennas for the entry of the two and connect its only outlet to the receiver and then change the plates with a change in him. I'm not sure this device to work there but I guess in theory. If not exist or can not buy I suggest to build one. A few connectors, some wires, a switch and some welding .. Shouldn't cost more than a few lined Fnac.
Sadoun PowerTech DiSEqC HH Satellite Dish Motors
Diseqc Fta
Tuesday, February 16th, 2010
Introduction to DiSEqC and USALS Standards
Switch Fta
Tuesday, February 16th, 2010
CW 800s: Watch channels from 3 diff SATs without constantly switching diseqc (lnb) & freq in antenae settings?
Hi. I have a Captive Works 800s and a dish with 3 LNBs (each pointed at a different bird). I scoured the net and figured out which FTA channels come in on which bird, at which freq and using which tranponder. I then manually added all the transponders to one of the SATs pre-programmed in the CW800s. Then, I went to antennae settings, set the diseqc and freq settings corresponding to bird #1 and did a auto scan. Saved settings. Went back to antennae settings, changed the diseqc and freq settings so that they correspond to bird #2 and did a auto scan. Saved settings. Repeated this step once more for bird #3.
Now, all channels I want to watch work. But every time I go to a FTA channel that’s served by a diff bird, I have to go back to antennae settings and change the freq and diseqc settings to those that correspond to that bird. Pain in the neck.
Please help me. Thank you.
Get three more screens and two more Captive Works receivers. Connect two receivers to two TVs and do not flip the bird.
The third screen is for HQ porn. Holler if you need some.
Were you really expecting a serious answer?
BNR nieuwsradio – FTA due to switch-off Eutelsat 16 degrees East
