Posts Tagged ‘diseqc’

Meter Lnb

Thursday, February 11th, 2010

Meter Lnb
Can you use a meter to read 87ii FLUKE 5 LNB KU / KA SIGNALS?

The SAT MEG signals are in Hz. Am I right? FLUKE METER MI is MEG HZ can read. SO YOU CAN PUT IN LINE FOR ESTABLISHING A 5 LNB DISH ??????? THANKS

The Ku band is about 11-12GHz GHz. The band C is 3-4GHz. I do not know anyhting about your meter by chance. Good luck.

4.5 Meter ViaSat Ku band antenna for sale, big dish



Motorized Fta

Tuesday, January 5th, 2010

Motorized Fta

East To West FTA 80 CM Dish Move Motorized System



Satellite Diseqc

Sunday, January 3rd, 2010

Satellite Diseqc
Does anyone know the basics of motorised dish installation? I have a satellite meter made by horizon.?

The dish is on the wall and the cable is run. Its a diseqc motor and my meter has several pre installed satellites in it. Can anyone tell me the best way to install it to perfection?

I’ve installed my own Motorized FTA Dish.

I’m not familiar with the Horizon brand meter , but I can give you some basic info for success.

With your motor on the 0 position point the dish toward your True south satellite if you are in the Northern Hemisphere.

Make sure that where your dish is mounted that the pole or mast is plumb ( level ) ,it’s very important for perfect tracking.

You will of course need the correct angle for your motor which will vary depending on your location.

Need more help , the best satellite True FTA forum.
Satellite Guys U.S.

http://www.satelliteguys.us/free-air-fta-discussion/

I got alot of help from them when I setup my dish .

The SG2100 DiSEqC FTA Satellite Motor




Motorized Fta

Wednesday, December 30th, 2009

Motorized Fta
FTA How to watch all $chanel for free? and how to install motorized dish?

lookup hh90 on google.

———————————–

http://dishone.tv

Motorized FTA satellite Dish Set Up




Diseqc Switch

Monday, December 21st, 2009

Diseqc Switch
Ok, thanks to you I know now I need a 2 DiSEqC switch.?

Now I need help setting up the Antenna ',' I one XTSC Xtreme-520 Satellite & Terrestrial and Sat Hotbird Hotbird window looks like this = SAT / / TRANSPONDERr = 11 **** ect / / POWER LN = ON / / LNB U-type = LBN1 / / 22Khz = Auto / / TYPE COMMUTE = None / / option = None / / OV/12V = OV ….. With a DiSEqC switch is the window of Astra has to be the same set up (TYPE I CUMMUT the DiSEqC poss) I suppose I should put that on both windows. But if the LNB to OFF in the window of the new Astra or ON? ie. is the switch lighting? Sorry for keeping but can not find a simple guide Thanks

Must be one or the other. One by one out.

FTA Dish Motor LNB and LNBF Dishes FTA Receivers & More….