Posts Tagged ‘mpeg2’

Fortec Star

Saturday, March 6th, 2010

Fortec Star
Plasma TV picture quality?

I have a 2 years old Matsui 42 "plasma TV. To buy it again, connected to the sky, – Video / DVD and a star Fortec with motorized antenna, usually See everything goes through Sky Box, image quality has been perfect until about three weeks ago, and then began to be snowy / curled, as if the sky dish / no wire was very good, check connections today and seemed fine, so next I plugged the antenna normal TV directly to the TV picture remains poor, as with Fortec Star, for 3 weeks now and then there is a clicking sound coming from the TV then the Quality is perfect again, but only lasts a few seconds, anyone else had a problem like this? all antennas / cable / dish Fortec star dish sky and are 2 years, thanks in advance for any information

check to see if there is water in the outer conductor or your lose and maybe move a little direction

Fortec Star



Tags: , , , ,
Posted in Articles | No Comments »

Output Fta

Friday, November 27th, 2009

Output Fta
what type of video equipment should i connect with satellite receiver to get about 7 output channels.?

i connected a FTA satellite system and at a position i have more than 10 good channels; i want to program my TV to pick each station on different tv channel ,like a hotel room where you can view channel of your choice not what is showing in another persons room nor the reception.

First you will need a receiver for each channel you want to watch, so if you want 10 channels to select from, then you need 10 receivers. Next you will need a 10 channel RF modulator to send the signals out on 10 different tv chanels. This will cost big $$$.

You can use one receiver and one modulator and split the signal to 10 tv’s but each tv will watch the same program. You could then us a wireless remote to control channel changing from the different rooms.




Tags: , , , ,
Posted in Satellite Shop | 2 Comments »