How to remove a multi-function switch for a GMC Jimmy 97?
Thanks for the help! I just found the following website too … http://www.automotiveforums.com/vbulletin/showthread.php?t=577320 Oh, another question … There are two sets of cables entering the multifunction switch and a group of cables emerging. Where do you connect?
You need to pull the wheel out. So if you want to play with the air bag: Turn the wheel to the left * 90 (Middle), use a flat head screwdriver to release the clip from behind the wheel. Then turn 90 * to the right and do the same. bag Open air mount. Remove the horn contact assembly, remembering how it is installed. Most likely need a wheel puller to get the wheel out. Remove the wheel. Remove the tilt lever in the column, simply pull it out and move out. Then you have access to all screws to remove the cover plastic column, some are in the bottom, somewhere in the steering wheel was. Then, disconnect the power cord for the multi-switch, follow the harness below the steering column under the dash to find the plug. If my memory is flat and has about 10 wires on it in a single row. Disconnect and fish up column. Then remove the switch assembly. substitution is only backward. For all the effort and curses, take it to the dealer. That's what I did and rarely take my car to the store. It's a real pain ————————————— EDIT … —————————- After looking at the link you sent I was wrong on the wheel. I made the assumption that had to be removed, because the vehicles need a larger size (notice that I mentioned a larger size) … I apologize, but seems to be easier than I thought.
Little big planet multi-switch
