How I can test a boat motor switch or kill switch, no power of the boat, the battery right?
1998 90hp Force was running large, entered the spring and lost all power, I thought I would start with the ignition switch or kill switch? Thanks
The kill switch has nothing to do with the battery – only disable the short circuit spark ignition module. If it is defective and crank the engine starts up the battery is depleted, but not start. Find the 20 amp fuse in an inline fuse holder red wire on a high in the port side of the engine, which comes from the plug from the main deck. Disconnect, clean and reconnect the cables to the battery post – corrosion can be hidden between two connectors there. By "clean" I mean to make 'em shine, use sandpaper if necessary. For "reconnect" I mean tight tight tight – if you have wing nuts, pliers used in them. Loose connections kill rectifiers. Jiggle manage change – perhaps the neutral safety switch is getting sticky. After it is out of the multimeter and test the switch.
BOSS – Power Supply-Master Switch Pedal PSM-5 (PSM5)
